Comco AccuFlo AF10-CE, Руководство пользователя

Страница: 4 / 14

1‐818‐841‐5500
4
www.comcoinc.com
1. Remove the tank cover.
2. Fill the tank with powder. Do not fill
above the top of bypass tube.
3. Replace the tank cover and secure (only
¾ turn required).
Make Connections
Add Abrasive
VENT HOSE
IS ROUTED
THROUGH
THE VENT
PINCH
INLET AIR FITTING
THE ABRASIVE HOSE FROM THE
POWDERGATE VALVE RUNS DIRECTLY
TO THE NOZZLE.

DO NOT ROUTE THIS HOSE
THROUGH THE VENT PINCH!
1. Place the ComfortGrip handpiece inside the work chamber.
2. Place the open end of the vent hose into the back of the workstation or into the dust
collector hose.
3. Connect the power cord and the blast control cable.
4. Connect the air supply to the “Air In” fitting (using ¼" tubing provided in the accessory kit.)
TO NOZZLE(S)