Comcater COMENDA Hi-Line HC Series Скачать руководство пользователя страница 8

Страница: 8 / 18

ENGLISH

Part 2: Reserved for Operator

2.1

HC-HCXL WASH PHASES

2.1.a Switching on and Preparing machine (Fig. 1)

START

To switch the machine on, keep

the START (ON/OFF) key pres-

sed for about 5 sec.

The START key turns ORANGE

IMPORTANT

hen switched on

, the last

cycle performed appears on

the display.

Hot water start to load automati-

cally from the boiler to the tank.

FILLING appears on the di-

splay.

When the correct water level is

reached in the tank, the START

key FLASHES GREEN.

When the level is reached, the

heaters switch on first to heat

the water in the boiler and then

in the tank.

When the set temperature is

reached in the boiler and in the

tank, the START key remains

lit STEADY GREEN.

READY to GO appears on the

display.

START

WASH OPERATIONS

Dispensing of detergent and rinse agent is managed

both in the regulation phase and in the restore

phase. The amount of detergent/rinse agent is found

by an authorised technician during installation and

is adapted to the water volume and hardness.

At each rinse cycle, the machine restores the

detergent and rinse agent values foreseen by the

manufacturer.

ATTENTION

hen the items to be washed have burned encru-

stations or much time has passed before being
washed, they must be soaked in water with an
appropriate emollient product.
Do not use manual washing products as that they
could form suds inside the machine.

Introduce the dishrack into the machine after having

removed solid waste from the objects to be washed.

° ECO (rapid)

° GLASSES (DIN 10511)

° DISHES (DIN 10510)

° INTENSIVE

Every time the key is touched, the settable cycle is di-

splayed.

IMPORTANT

hen the machine is switched off, the selected cycle

remains stored.

When the machine is switched back on, the last cycle

selected appears on the display.

ECO

= TANK ACTUAL temperature

= BOILER ACTUAL temperature

= TANK SET temperature

= BOILER SET temperature

Extra CYCLE Functions

° DRAIN

° SELF-WASHING

2.1.b Cycle Selection

The duration of the wash cycle can be chosen

between different cycle times:

selected by touching the

SCROLL key

START

READY TO GO

FILLING

IMPORTANT

t is possible to view both the ACTUAL

and SET temperature in the boiler and in

the tank for the selected cycle by pressing

the SCROLL key.

Press the BACK key to go

back.

Содержание COMENDA Hi-Line HC Series



















Результаты поиска

Содержание COMENDA Hi-Line HC Series

Отзывы:

Похожие инструкции для COMENDA Hi-Line HC Series

Бренды по названию

Популярные бренды

Comcater COMENDA Hi-Line HC Series, Инструкция по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание COMENDA Hi-Line HC Series

Отзывы:

Похожие инструкции для COMENDA Hi-Line HC Series

Бренды по названию

Популярные бренды