Comcater COMENDA AC2E, Инструкция по эксплуатации

Страница: 12 / 28

instruction for the user
12
INSTRUCTION AFTER THE WASHING SESSION
When the wash operations are complete:
1. Press button "S1" and turn switch "Q2" into position "O" to switch off the
machine.
2. Isolate the machine by means of the wall switch and close the water valve and steam
supply (this applies only to steam heating machines).
3. Lift the inspection doors and make sure that they are perfectly hooked onto the support.
4. Take off the overflow pipe in order to empty the tanks.
5. Take out the anti -splash curtains and the filters for cleaning.
6. Check and, if necessary, clean the wash and rinse nozzles. Clean out the wash tanks with
a wash spray hose assembly.
7. Clean the external surface of the machine with a damp cloth; do not use jets of water, as,
apart from being dangerous, damage to electric components may occur; do not use
abrasive detergents or those containing chlorine.
8. Reassemble all devices into their locations, taking care that:
•
the curtains are turned with the short side towards the entry of the items being washed
•
the wash nozzles are turned towards the items being washed
9. Keep doors open in order to avoid unpleasant odours, when not in use.
USEFUL ADVICE
Maintenance
IMPORTANT: Before undertaking cleaning and maintenance work, isolate the machine
from the electric supply by switching off the wall switch or the disconnecting switch "Q1".
ATTENTION: do not unplug the disconnecting switch "Q1" when machine is switched
on.
Regular check and cleaning of the nozzles is advisable. The frequency of cleaning depends
on the quantity of leftovers and foodsoiling left on the crockery, insufficient cleaning of
nozzles will give poor wash results. Do not use corrosive products such as hypochloride
sodium (bleaching products), acids in general, steel wool and steel brushes for cleaning the
machine inside and outside.
To ensure the machine is kept in a perfect hygienic condition, it is advisable to carry out the
following periodic operations.
Ensure the procedures and frequency recommended by the detergent supplier are followed,
also ensure that the correct products and equipment are used. In order to avoid damages to
the machine, do not exceed the recommended dosing and at the end of the procedures, rinse
thoroughly.