Comcater COMENDA AC2E, Инструкция по эксплуатации

Страница: 10 / 28

instruction for the user
10
NOTES BEFORE WASHING
1)Make sure that:
•
wall isolating switch is connected
•
water and steam taps* are open
•
there is no lack of water and steam* in the supply net
•
tank and pump suction filters are clean and are located correctly and the overflow pipe is
in position and closed
•
curtains are correctly placed
•
inspection doors are closed
•
detergent and rinse aid dispensers are full
•
dimensions of the dishware do not exceed those prescribed
OPERATION AND USE
Switching on
In order to turn the machine on simply rotate the main switch "Q2" to the right on to
position "I". Lamp "H01" will illuminate.
Close all machine doors.
Wait for lamp "H02" to turn on indicating tank is full.
Every time the button "SELECT" is pushed the display show:
1
: water supply temperature probe (55°C)
2
: prewash temperature probe (40-45°C)
3,4,5,6 :
wash temperatures probes (55-60°C)
7 :
rinse temperature probe (80-85°C)
Wait until the wash tank temperature reaches 55/60°C; at this point the machine is ready for
use.
Select the machine speed, using the main switch " Q2":
- position I - for heavily soiled dishes;
- position II - for lightly soiled items;
-
position II - automatic speed change witch APRS -IF REQUIRED.
Push switch "S1" to start or stop washing process.
The lamp "H03" indicates that the pump is overheating, technical assistance required
Push switch "SAT" to start the autotimer function; lamp "HAT" will illuminate.
The autotimer function with automatic reset temporarily stops the operation, if no racks
have been introduced into the machine. Placing a rack into the machine, this restarts
automatically.
_________________________________________
(*)this applies only to machines with steam heating