Comcater ACS122, Инструкция по эксплуатации

Страница: 20 / 26

instruction for the service people
20
SOME PROBLEMS WHICH MAY OCCUR DURING THE USE OF THE
DISHWASHER, THEIR REASONS AND REMEDIES
PROBLEMS TROUBLE SHOOTING
When switching on the machine,
a)make sure that the wall isolating
Lamp "H01" does not light up switch is making contact and
the relevant fuses are not burnt.
b)make sure that the wall switch
is connected
c)make sure that the fuses "F15"
and "F16" of the transformer "T1" are
not burnt.
Warning lamp "H03" is switched on
a)check the overload and contactor of
each motor and reset any which have
tripped
b)make sure that the supply doesn’t
fluctuate more than 6% of the
nominal value
c)make sure that the motors are
not drawing more current than the
value shown on the plate of the
motor
d)make sure that there are three
phases to the motors If not, check the
contactor
Incorrect filling of the tanks;
a)Check and adjust the pressure
lamp "H02" does not illuminate switch "SL3" if required
b)make sure that the local isolating
valve for the water supply is open
and that there is water in the supply
pipes
c)check and ensure that the
overflowpipe is seated correctly and
in its correct position