Comcater ACS122, Инструкция по эксплуатации

Страница: 13 / 26

instruction for the user
13
Motor protection
Each motor is protected against overload by overload relays QF1, QF2.... placed in the control
box (see electric diagram).
Lamp "H03" is on, if one of the overload relays is activated. In this case the machine must be
switched off and qualified staff are to be contacted for the repair work. (see paragraph
MAINTENANCE).
Element protection
Each element is protected against short-circuits by the fuses (FE3...) or with automatics
(QFE10). The tank elements are protected against operation without water in the tanks, by
pressure switches and those in the boiler and dryer by safety thermostats which have to be
manually reset.
In case of intermittent problems contact qualified and authorised staff. (see paragraph
MAINTENANCE).
Other risks
Although the machine is provided with the above mentioned safety devices, there are still the
risks listed below.
Risk of trapping the upper limbs
As previously pointed out above, the conveyor system is provided with a clutch-type
mechanical torque control, the adjustment must be related to the mechanical torque required
for the transport of the items being washed.
The mechanical risks of trapping the upper limbs have been eliminated by protecting and
isolating the dangerous moving parts. When the machine is operating do not introduce your
arms into the wash tunnel.
Risks of burning the upper limbs
Under the paragraph INSTRUCTION DURING THE WASHING we have previously advised
that you must not put your hands into the hot and detergent water of the tanks. This might cause
burns and skin irritations. In case this should happen immediately rinse under fresh water and
follow the instructions of the product being used.