11
Manual
Checking System Status
1. Press the
button to light the lED to show the
current status of the security system.
2. The lED flashes red once to indicate that it has
contacted the system, then:
— lights green for 3 seconds if the system
is disarmed.
— lights red for 3 seconds if the system is armed.
— lights orange for 3 seconds if the system is not ready
to be armed (for example, a door is open).
arming the System
From the keychain remote, you can arm your
system in
[Arm Away]
mode or
[Arm Stay]
(
[Arm Night]
mode must be activated from the
Touch Screen or Subscriber Portal).
arm away
Press the
button for about 2 seconds to arm the
system in arm away mode (the home is unoccupied).
The LED flashes red once to indicate that it
has contacted the system, then lights red for
1 second. The exit delay starts.
arm Stay
Press the
button for about 2 seconds to arm the
system in arm Stay mode (there are still people
on the premises).
The LED flashes red once to indicate that it
has contacted the system, then lights red for
1 second. The exit delay starts.
Keychain Remote
Disarming the System
Before entering the premises in armed state, press
the
button for about 2 seconds to disarm the
system without entering the premises.
The LED flashes green once to indicate that it
has contacted the system, then lights green for
1 second indicating that the system is disarmed.
Sending an Emergency
Police alarm
Press and hold the button for 3 seconds to send
an audible alarm to central monitoring for police
assistance. The lED flashes orange to indicate that
the alarm has been sent. additionally, contact persons
will receive e-mail and SMS notifications if they are
configured to do so.
12
qUESTIONS?
customer.comcast.com/homeSecurity
CT1440_HomeS2_Manual_BR_WIP.indd 11-12
11/18/11 2:57 PM
