6
Should the parameter need adjusting:
1.
Press the
button for six seconds. The “E1” parameter is displayed.
2.
Press the
or
buttons until the required value is displayed.
3.
Press the
button to store the new value and cycle to the next parameter.
NOTE: the controller times out after 10 seconds if no buttons are pressed.
MANUAL DEFROST
Press and hold the
button for 6 seconds to begin automatic defrost. The defrost light illuminates.
CLEANING, CARE & MAINTENANCE
1. Switch off and disconnect from the power supply before cleaning
2. The doors can be removed for ease of cleaning
3. Clean the interior of the appliance as often as possible
4. Do not use abrasive cleaning agents. These can leave harmful residues
5. Clean the door seal with water only
6. Always wipe dry after cleaning
7. Do not allow water used in cleaning to run through the drain hole into the evaporation pan
REPLACING THE INTERIOR LAMP
Call your dealer or a qualified electrician, the Lamp Assembly is available to purchase as a spare part.
CLEANING THE CONDENSER
Periodically cleaning the condenser can extend the life of the appliance. We recommend that our agent or
qualified technician clean the condenser.
