Section 11 - Installation of Navette 22 Infant Car Seat
(continued)
31
Securing with
Vehicle Lap Belt
:
To secure car seat with Vehicle Lap and
Shoulder Belt, go to step 6.
Slide belt into Vehicle Belt Guides on
car seat
(fig. a)
and buckle lap belt.
Be sure lap belt is not twisted.
Proceed to Step 7.
Securing with
Vehicle Lap and Shoulder
Belt
:
Slide lap portion of vehicle belt into Vehicle
Belt Guides on car seat
(fig. b)
and buckle
vehicle belt. Be sure lap belt is not twisted.
Place shoulder belt against vehicle seat.
DO NOT place shoulder belt through
vehicle belt guides on car seat.
Position car seat at the proper recline
angle. Recline reference line must
be horizontal
(fig. a
or
b)
.
NOTE:
Vehicle must be parked on flat, level surface during this installation.
(fig. a)
Lap Belt
Vehicle
Belt
Guide
5
(fig. b)
Lap/Shoulder Belt
Vehicle
Belt
Guide
6
Recline
Reference
Line
Recline
Reference
Line
7
Section 11 - Installation of Navette 22 Infant Car Seat
(continued)
32
Tighten the vehicle lap belt around car seat.
Press down firmly on car seat to compress
vehicle seat cushion while tightening vehicle
lap belt
(fig. c)
.
Check for secure installation. Pull front to back
and left to right to check for secure installation
(fig. d)
. Vehicle lap belt MUST stay tight.
If vehicle lap belt does not stay tight,
see “Vehicle Seat Belts” section 15 or
move to a different setting location.
NOTE:
Lap and Shoulder Belts
If using a lap and shoulder belt
and the lap belt does not stay
tight, unbuckle seat belt and
pull out on latch plate
(fig. e)
.
If belt slides freely through latch
plate, a locking clip must be
used as described in “Locking
Clip” section 15a.
8
(fig. d)
9
(fig. c)
(fig. e)
10
All manuals and user guides at all-guides.com