Combi Navette 22 страница 16 Скачать руководство пользователя

Страница: 16 / 42

Section 11 - Installation of Navette 22 Infant Car Seat

(continued)

Storage of Lower Anchor Belt and Lower Anchor Connectors:

When carrying the car seat or using with

the Navette 22 / Shuttle 22 Base (sold

separately), the LATCH belt on car seat

MUST be stored.

To store the LATCH belt:

A. Hook one Lower Anchor connector

to the LATCH storage loop on each

side of car seat pad

(fig. a)

B. Pull free end of LATCH belt

to remove slack in the

LATCH belt.

C. Fold over free end of LATCH

belt and store under seat

pad

(fig. b)

(fig. a)

Lower

Anchor

Connector

LATCH

Storage

Loop

LATCH

Storage

Loop

(fig. b)

Folded

LATCH

Belt

• Strangulation Hazard - Always store LATCH lower anchor

connectors and LATCH belt when not in use.

WARNING

- DEATH or SERIOUS INJURYcan occur

Section 11 - Installation of Navette 22 Infant Car Seat

(continued)

11b. Securing Infant Car Seat with Vehicle Seat Belt:

•

Vehicle seat belt MUST stay tightly adjusted around car seat

at all times. If vehicle seat belt does not stay tight, read

the vehicle owner’s manual and “Vehicle Seat Belts” section

in this manual.

•

Not all vehicle seat belts can be used with a car seat. Read

vehicle owner’s manual and “Vehicle Seat Belts” section in this

manual.

WARNING

- DEATH or SERIOUS INJURYcan occur

Refer to vehicle owner’s manual to identify the seating locations which

can be used with a car seat. Check for specific instructions or limitations

for car seat use.

After selecting a seating location, if vehicle seat back is adjustable, adjust

vehicle seat back into most upright position or the position specified in

the vehicle owner’s manual.

Unsnap Vehicle Belt Guide Covers and tuck covers inside seat.

Place car seat rear-facing on vehicle seat. Keep handle up in carry position.

All manuals and user guides at all-guides.com

all-guides.com

Содержание Navette 22











































Результаты поиска

Содержание Navette 22

Отзывы:

Похожие инструкции для Navette 22

Бренды по названию

Популярные бренды

Combi Navette 22, Инструкция по эксплуатации

Результаты поиска

Содержание Navette 22

Отзывы:

Похожие инструкции для Navette 22

Бренды по названию

Популярные бренды