Combi Navette 22 страница 39 Скачать руководство пользователя

Страница: 39 / 42

Section 15 - Vehicle Seat Belts (continued)

Slide locking clip onto vehicle seat belts approximately

1/2 inch (1 cm) away from latch plate

(fig. b)

Slide vehicle belt back into vehicle lap belt guide

or belt path opening in base.

- Check to be sure vehicle lap belt is still

correctly routed throughout entire belt path.

Re-buckle vehicle seat belt.

Test installation to see if car seat or base is secure.

If not secure, additional vehicle seat belt tightening

may be necessary.

• Unbuckle vehicle seat belt.

• Hold vehicle seat belts together and remove locking clip.

• Shorten length of vehicle lap belt portion slightly by pulling

vehicle lap belt through latch plate.

• Re-attach locking clip.

• Buckle vehicle seat belt.

HINT:

Press car seat or base down into vehicle seat cushion to

help buckle vehicle seat belt.
Test installation to see if car seat or base is secure, if not secure,

repeat above steps until car seat is secure.

4
5

(fig. b)

1/2 inch (1 cm)

16a. CERTIFICATION

- This car seat meets or exceeds all applicable requirements of Federal

Motor Vehicle Safety Standard 213 for use in motor vehicles and aircraft.

16b. AIRCRAFT USE

This restraint is Certified for Use in Motor Vehicles and Aircraft

(see label on car seat).

- Contact airline about their policy on use of child restraints on the Aircraft.

- Use this car seat only on forward-facing aircraft seats.

- Install car seat on aircraft the same way it is installed in a vehicle.

16c. WARM WEATHER

- Car seat parts can get very hot in the sun or warm weather.

To avoid burns always check before putting the child in the car seat.

16d. VEHICLE SEAT PROTECTION

- Protect vehicle seat. Use a thin car seat mat, thin towel or thin blanket

under and behind car seat.

16e. CAR SEAT USEFUL LIFE

- DO NOT use after 7 years from date of manufacture on label.

Section 16 - Additional Information

All manuals and user guides at all-guides.com

Содержание Navette 22











































Результаты поиска

Содержание Navette 22

Отзывы:

Похожие инструкции для Navette 22

Бренды по названию

Популярные бренды

Combi Navette 22, Инструкция по эксплуатации

Результаты поиска

Содержание Navette 22

Отзывы:

Похожие инструкции для Navette 22

Бренды по названию

Популярные бренды