38
Attach tether hook
(A)
to vehicle top tether anchor
hardware
(B) (fig. j)
and pull strap to remove slack
from top tether. Check that the tether strap is not
twisted. Final tightening will occur in a later step.
NOTE:
1. To lengthen the tether strap, tip the
tether belt adjuster and pull the tether
strap back through the adjuster.
2. If top tether anchor
(B)
is not available in
vehicle, see vehicle owner’s manual or
Top Tether Information in “Selecting A
Vehicle Seating Location” section.
3. Tether strap should always be used when a tether anchor
is available. The top tether is used for forward-facing use.
Tighten lower anchor belt to secure the car seat.
- Press down in center of car seat to
depress the vehicle cushion and
pull free end of lower anchor belt
to tighten belt
(fig. k)
.
Snugly adjust tether strap by pulling on
free end.
Check that the upper and lower shoulder
belt guides are contacting the vehicle seat
back and that the forward-facing contact
zone is in full contact with the vehicle
seat bottom
(fig. k)
.
(B)
(A)
Pull to
tighten
(fig. j)
BEL
T
HER
E
(fig. k)
11
12
13
Upper
Shoulder
Belt
Guide
Lower
Shoulder
Belt
Guide
10
Forward-Facing
Contact Zone
CCS0210G (EN) 061711.qxd:CCS0210G (EN) 061711 6/17/11 2:24 PM Page 39
All manuals and user guides at all-guides.com