After selecting a seating location, if vehicle seat back
is adjustable, adjust seat back into most upright position
or the position specified in the vehicle owner’s manual.
Remove LATCH lower anchor belt from
the LATCH storage pocket on right side of
the seat pad.
- Lengthen lower anchor belt by pressing
adjuster release button while pulling belt
to extend the length of lower anchor belt
(fig. c)
.
Place the LATCH lower anchor belt into
the rear-facing belt path.
- Lift and fold front of seat pad
back into car seat to access
belt path by unsnapping
front and unhooking sides
of pad
(fig. d)
.
- With LATCH connector slot
on the bottom and red
release button on side
away from car seat, place
lower anchor belt into
rear-facing belt path under
arms, pulling forward into belt
path location identified with the
blue “Lap Belt or LATCH Here”
arrows.
- Center lower anchor belt and check that it is not twisted.
- Pull front of seat pad forward, lower down and secure in place.
3
2
4
(fig. d)
(fig. c)
Lower
Anchor
Belt
Adjuster
Release
Button
Pull
23
Rear-facing
Belt Path
Slot
Red
Release
Button
Front of Pad
Folded Back
CCS0210G (EN) 061711.qxd:CCS0210G (EN) 061711 6/17/11 2:24 PM Page 24
All manuals and user guides at all-guides.com