• LATCH or vehicle seat belt MUST be routed though
rear-facing belt path when using car seat rear-facing.
• LATCH belt MUST stay tightly adjusted around car seat
at all times.
• Only use the car seat LATCH System in vehicle seating locations
designated by the vehicle manufacturer for use with LATCH and
that have an anchor spacing of 11 inches (280 mm).
• LATCH connectors must be secured to the vehicle LATCH
anchors only. Connection to other vehicle anchors or
vehicle components could result in the anchor tearing
free in a crash.
• Never attach more than one hook-on connector to a
vehicle lower anchor unless recommended by the vehicle
owner’s manual for that vehicle.
• Always use rear-facing tether whenever possible.
WARNING
- DEATH or SERIOUS INJURY can occur
Refer to vehicle owner’s manual to identify the
seating locations with LATCH Anchorage System.
Select the seating location to be used and locate
the vehicle lower anchors at the seat bight
(fig. a)
for that seating location. Location of some
vehicle lower anchors will be identified by
the symbol in
(fig. b)
.
1
(fig. a)
Lower
Anchors
(fig. b)
22
10a. Rear-facing Installation With LATCH
CCS0210G (EN) 061711.qxd:CCS0210G (EN) 061711 6/17/11 2:24 PM Page 23
All manuals and user guides at all-guides.com
