InteliATS
NT
STD, SW version 2.0, ©ComAp – June 2010
52
IA-NT- STD-2.0-Reference Guide.pdf
ware
mote signalling
and control software for InteliATS , InteliLite and InteliDrive Lite controllers.
It is the optional
ible to upload into controller instead of standard controller’s firmware.
IL-NT-RD Remote display soft
This chapter describes Remote display software IL-NT-RD, which is designed as an re
NT
NT
software which is poss
General description
Remote display software works as “remote display and control” for the master InteliAT
or InteliDrive Lite controller. Genset/Engines can be controlled
S
NT
, InteliLite
NT
from remote display as well as from
master controller. All remote display screens (Measure, Setpoints and History) displays the same data
r. Front panel buttons on both controllers work the same way. All remote display
like master controlle
LED’s shows the same state as corresponding LED’s on master controller.
Warning !
It is highly recommended to use the same type and model of controller for master and remote
d the proper function of all buttons, LED diods and display.
play are
display. Only in such case is assure
Another combinations of HW types and models from Master controller and remote dis
not supported nor tested!
IL-NT-RD Software installation
The IL-NT-RD remote display firmware is installed in the same way as any other IA-NT firmware using
LiteEdit software. Please see LiteEdit Reference guide for details about upgrading firmware. IL-NT-RD
.
back the
•
Open any type of online connection.
•
DDE server will try to open the connection, but it will fail and write red error message in the
status bar.
•
At this moment go to
C
ONTROLLER
->
P
ROGRAMMING AND CLONING
->
P
ROGRAMMING
and select
proper!
firmware you want program to the controller. Choosing the wrong type of firmware
may result in non-functional controller.
contains only firmware, not an archive
However when there is IL-NT-RD firmware installed in the controller the procedure to install
original standard firmware is following:
•
Press "OK" button to programm the firmware to the controller.
