InteliATS
NT
STD, SW version 2.0, ©ComAp – June 2010
39
IA-NT- STD-2.0-Reference Guide.pdf
s
Setpoint
Password
EnterPassword
Password is a four-digit number. Password enables change of relevant protected setpoints.
key to enter the password.
Use
↑
or
↓
keys to set and ENTER
N
OTE
:
There is only 1 level of a password.
ChangePassword
Use
↑
or
↓
keys to set and ENTER key to change the password.
N
OTE
:
At first the password has to be entered before the new password can be changed.
Basic Settings
ControllerN m
a e
NT
User de
d name
fine
, used for Inteli identification at remote phone or mobile connection.
llerN
14 characters long and have to be entered using LiteEdit software.
eq
[Hz]
:
65 Hz
e
[s]
ut prior to the engine start.
zero
t to leave the output
Prestart/Pretzransfer
open.
:
MaxStartDel [s]
This timeout starts after closing binary output GEN START/STOP. When generator
does not reach
defined limits
Basic Settings:
Nominal Freq
) within
MaxStartDel,
Trp Start Fail
alarm occurs and the
gen-set will shut down. See the table below for a description of the engine start evaluation.
If MaxStartDel is longer then 600 s it means there is NO TIMEOUT.
Step:
1s
Range:
0 – 600 s, 601 s = NO TIMEOUT
Contro
ame
is max
Nominal
Fr
Nominal generator frequency (usually 50 or 60 Hz )
1Hz
Step:
Range
45 –
Prestart
Tim
Tim
ing
e of clos
of the
Prestart
and/or
Pretransfer
outp
Set to
if you wan
Step:
1s
Range:
0 – 600 s
Cooling
Time
[s]
e stop.
Runtime of the unloaded gen-set to cool the engine befor
1s
Step:
Range
0 – 3600 s
