27
3. With the base up, loosen the knobs that fix the left-hand splash guard and are
located on the base.
4. Unthread the left-hand splash guard and rest it on the floor.
5. Rotate the brush anticlockwise until it comes out of the brush-holder plate seat,
as shown in the figure.
6. Always check the bristles for signs of wear. You are advised to replace the
brushes when the bristles are less than 15 mm long
ATTENTION: this operation must be carried out using gloves to
protect against contact with dangerous solutions
33. DISASSEMBLING THE BRUSH (TRIPLA 65-75 2009)
1. Engage the parking brake.
2. Turn the key of the master switch to the "OFF" position, and remove the key.
3. With the base up, remove the left-hand splash guard using the release levers
(1) on the base, then rest it on the floor.
4.
Rotate the brush anticlockwise until it comes out of the brush-holder plate seat, as
shown in the figure. Release the right-hand brush by rotating in the opposite direction.
5. Always check the bristles for signs of wear. You are advised to replace the
brushes when the bristles are less than 15 mm long
ATTENTION: this operation must be carried out using gloves to
protect against contact with dangerous solutions
