18
5. With the base up, place the brush in the plate housing beneath the base,
turning the brush until the three pins enter the niches in the plate itself.
6. Turn until the pin is pushed towards the coupling spring and is locked into place.
ATTENTION! During this operation, check there are no
people or objects near the brushes
ATTENTION: this operation must be carried out wearing
gloves to protect your hands
19. ASSEMBLING THE BRUSH (TRIPLA 65 -75 2009 BASES)
1. Use the parking brake handle (1) to stop the machine.
2. Raise the base, moving it with the momentary bipolar two-way switch.
3. Turn the key of the master switch anticlockwise to the “OFF” position.
4. Remove the left side splash guard by means of the release levers (1) on the base.
7. With the base up, place the brush in the plate housing beneath the base,
turning the brush until the three pins enter the niches in the plate itself.
8. turn until the pin is pushed towards the coupling spring and is locked into
place.
The figure shows the rotation direction for coupling the right-hand brush; for the
left-hand one, rotate in the opposite direction.
ATTENTION! During this operation, check there are no
people or objects near the brushes
ATTENTION: this operation must be carried out wearing
gloves to protect your hands
1
