ATTENTION:
• The cleaning and maintenance of the appliance should not be carried out by people
(including children) who do not have the necessary experience with and knowledge of
the appliance.
•
Never tamper with the machine's protection devices for any reason; always follow the supplied
routine maintenance instructions scrupulously.
•
If the machine needs to be pushed for maintenance purposes (batteries absent; discharged
batteries; etc.), never exceed 4 km/h.
•
If any issues are encountered while using the machine, check to make sure that these are
not due to a lack of proper maintenance. Otherwise, request the intervention of authorized
personnel or an Authorized service centre.
•
If any parts need to be replaced, always request ORIGINAL spare parts from an authorized
Dealer or Retailer.
•
In order to ensure the machine's safety and proper functionality, always have the scheduled
maintenance interventions (specified in the appropriate section of this Manual) performed by
authorized personnel or by an authorized Service Centre.
•
Do not clean the machine with direct or pressurized jets of water, or with corrosive substances.
•
If lead batteries (WET) have been installed on the machine, avoid tilting the machine beyond
30° with respect to the horizontal plane, as this could cause the highly corrosive liquid to leak
out of the batteries.
• Avoid contact with the battery acid.
•
Keep all metal objects away from the batteries.
• Use a non-conductive device for removing the battery.
•
Use a hoist and suitable equipment when lifting the batteries.
•
The battery must be installed by qualified personnel.
•
Always observe the safety measures of the site regarding battery removal.
•
Remove the batteries if the machine needs to be tilted in order to perform maintenance
procedures.
•
Have the machine checked by an authorised technical assistance centre every year.
•
When disposing of consumable materials, observe the laws and regulations in force. Once
the machine has reached the end of its service life, the materials contained within it must be
disposed of in an appropriate manner, keeping in mind that the machine itself has been built
using fully recyclable materials.
•
Only push or tow the machine when the seat is occupied by an operator able to control the
machine.
•
Do not wash the machine with pressurised water or wet the machine near electrical components.
•
All repairs must be carried out by qualified personnel.
•
Do not physically change the design characteristics of the machine.
•
Use spare parts supplied by Comac or by Comac service centres.
•
Wear personal protective equipment as required and as suggested in the manual.
TRANSPORT
WARNING:
• Empty both tanks before transporting.
•
Put the squeegee and the brushes in their work position before securing the machine to the
transport vehicle.
•
Use a ramp, a truck or trailer capable of supporting the weight of the machine and the operator.
11
