Page 11 of 39
INSTRUCTION MANUAL
SECT IO N 3
-
PRODUCT INFORMATION
Rev050321
4 mm Banana Plugs
These banana plug connectors allow for connection to the 4 mm banana jacks located on the respective
calibration adapters.
4 mm Banana Jacks
These banana jack connectors provide the receptacles for connection to the respective 4 mm diameter copper
rod.
Coaxial Port of Adapters
Each coaxial adapter is fitted with an N-type coaxial connector.
68 cm Copper Rod
4 mm diameter copper rod with 4 mm banana connectors at each end. Used with ADA-515-CLEM 150
Ω
to 50
Ω
Adapters for measurement of coupling factor and calibration of test levels.
63 cm Copper Rod
4 mm diameter copper rod with 4 mm banana connectors at each end. Used with CLEMA-6146 Calibration
Adapters for measurement of impedance and decoupling factor.
Distributed by: Reliant EMC LLC, +1 408 916
‐
5750, [email protected], www.reliantemc.com
