Columbia Journeyman Series, Руководство по обслуживанию

Страница: 76 / 141

Electric Component
9-1
Chapter 9
.
WARNING
• Please refer to Chapter 1 “Protection for
Electrical Safety”.
Key switch removal (SE)
1.
2. Take out the key from the key switch.
3. Remove the middle electrical regaining plate.
4. Pull out the instrument panel slowly (Note: do not
pull apart the connecting wire of the instrument
panel), pull out the wire of the key switch until the
plug-in package connecting the key switch wire to
the main cable appears, disengage the plug-in
package of the key switch wire from that of the
main cable.
5. Hold the key switch and remove the switch lock
nut from outboard of instrument panel.
6. Check
。
Refer to “Check Procedure 6—Circuit check for
key switch and accelerator pedal switch” of
Chapter 10, replace the part in case of any
inconsistency.
Key switch installation (SE)
Back to the removal steps
Assure that the E-Brake switch is in the middle
possition(Normal).