Columbia Journeyman Series, Руководство по обслуживанию, Страница: 77 / 141

Electric Component
9-2
Chapter 9
Removal of forward/reverse switch (SE)
Please refer to Chapter 1 “Protection for Electrical
Safety”.
2. Take out the key from the key switch.
3. Remove the middle electrical regaining plate.
4. Remove the connecting wire from switch.
5. Press the snap locks on the upper and lower
ends of the switch, push switch out of the
housing.
6. Check:
Continuity of the gear switch.
Refer to “Check Procedure 10—forward/reverse
switch” of Chapter 10, replace the part in
case of counter conditions.
Installation of forward/reverse switch
Back to the removal steps
NOTE:
The blue/white,black,black/yellow wires must
be connected correctly at relevant positions on
the gear switch.
Removal of headlight power switch
Please refer to Chapter 1 “Protection for Electrical
Safety”.
2.Take out the key from the key switch.
3. Remove the middle electrical regaining plate.
1. Assure that the E-Brake switch is in the middle
possition(Normal).
1. Assure that the E-Brake switch is in the middle
possition(Normal).
4. Remove the connecting wire from headlight power
switch.
5. Press the snap locks on the upper and lower ends
of the switch, push switch out of the housing.
check
Continuity of the headlight power switch