Columbia Journeyman Series, Руководство по обслуживанию

Страница: 84 / 141

Electric Component
9-5-4
Chapter 9
Horn installation
Return to disassembling steps
NOTE:
The horn wire must be connected correctly.
The tightening torque of the horn set bolt is:
9N
·
m (6.6ft
·
1b)
Combination switch removal (SS/LE)
1. Take out the key from the key switch.
Please refer to Chapter 1 “Protection for Electrical
Safety”.
5. Remove the screws(2) from the top of the
switch.
6. Disconnect the wire plug-in package of the
combination switch and remove the combination
switch .
2. Assure that the E-brake switch is in the middle
possition(Normal).
Please refer to Chapter 1 “Protection for Electrical
Safety”.
2. Take out the key from the key switch.
3. Remove the steering wheel .
4. Remove the steering stem covers .
1. Assure that the E-brake switch is in the middle
possition(Normal).
1
1
2
2
2
3
3
4
4
NOTE:
While remove hte steering wheel, be careful of
the Return board hook damage the Turn signal
stalk switch's link stopper.
link stopper