Columbia 12ABW32G897 Скачать руководство пользователя

Страница: 14 / 28

Controls and Features

Premium Drive Control

The premium drive control is located on the upper handle and

is used to engage the drive. Pushing the control forward will

engage the drive. The farther the control is pushed forward, the

faster the mower will propel. Once pressure is released from the

control it will return to the neutral position and the drive will be

disengaged.

Cutting Height Adjustment Lever

There are two cutting height adjustment configurations.

Single Lever (If Equipped)

The cutting height adjustment lever is located above the rear

left wheel. To adjust the cutting height, refer to Cutting Height

Adjustment in Assembly and Set-Up.

IMPORTANT:

Your mower features a two step process to engage

the blade:

Lockout Lever

The lockout lever is attached to the blade control on the upper

handle of the mower. Press down on it prior to engaging the

blade control.

Blade Control

The blade control is a

ttached to the upper handle of the mower.

After pressing down on the lockout lever, depress and squeeze

it a

gainst the upper handle to engage the blade. Release it to stop the

blade.

WARNING:

The blade control is a safety device.

Never attempt to bypass its operations.

Blade Control

Recoil Starter

Deck Wash Cutting Height

Adjustment

Lever

Cutting Height

Adjustment

Lever

Side Discharge

Chute

Premium

Drive Control

Electric Starter

Button†

† If Equipped

Figure 4-1

Lawn Mower controls and features are illustrated in Figure 3-1 and described on the following pages.

WARNING!

Read and follow all safety rules and instructions in this manual, including the entire Operation section, before

attempting to operate this machine. Failure to comply with all safety rules and instructions may result in personal injury.

† If Equipped

Blade Control

Lockout Lever

ON/OFF Switch †

Grass Catcher †

Recoil Starter

Deck Wash

Single Lever Cutting

Height Adjustment

Lever †

Mulch Plug

Rear Wheel

Cutting Height

Adjustment

Lever †

Caster Wheel

Cutting Height

Adjustment †

Side Discharge

Chute

Premium Drive

Control

Electric Starter

Push Key †

Содержание 12ABW32G897





























Результаты поиска

Содержание 12ABW32G897

Отзывы:

Похожие инструкции для 12ABW32G897

Бренды по названию

Популярные бренды

Columbia 12ABW32G897, Руководство оператора

Результаты поиска

Содержание 12ABW32G897

Отзывы:

Похожие инструкции для 12ABW32G897

Бренды по названию

Популярные бренды