10
S
ection
3 — A
SSembly
& S
et
-U
p
Attaching the Grass Catcher
(If Equipped)
1.
Follow steps below to assemble the grass catcher. Make
certain bag is turned right side out before assembling
(warning label will be on the outside).
a. Place bag over frame so that its black plastic side is
at the bottom.
b. Slip plastic channel of grass bag over hooks on the
frame. See Figure 3-4.
Figure 3-4
2.
Follow steps below to attach grass catcher:
a. Push down on the handle adjustment lever and
pivot handle into storage position.
See Figure 3-5.
Figure 3-5
b. Open the rear discharge door using the door handle.
See Figure 3-6.
Handle
Figure 3-6
c. Place the grass catcher into the slots on the rear
discharge support bracket. See Figure 3-7 inset.
Figure 3-7
d. Pivot the grass catcher down so that it rests over the
rear opening of the mower. See Figure 3-8. Let go
of discharge door so that it rests against the grass
catcher.
To remove grass catcher, hold open rear discharge door on the
mower. Lift grass catcher up and off of the slots in the handle
brackets. Release rear discharge door to allow it to close rear
opening of mower.
Содержание 12ABW32G897
Страница 28: ...28 Notes ...