background image

16

S

ection

 4— c

ontrolS

 

and

 F

eatureS

* Electric Start Model Shown

ON/OFF 

Switch

Figure 4-3

Using Your Lawn Mower

Be sure lawn is clear of stones, sticks, wire, or other objects 

which could damage lawn mower or engine. Such objects could 

be accidently thrown by the mower in any direction and cause 

serious injury to the operator, others, or the equipment.
1. 

Once the engine is running, press down on the lockout 

lever. See Figure 4-4.

Figure 4-4

2. 

Pull the blade control back against the drive control.  See 

Figure 4-4.

3. 

While continuing to hold the blade and drive controls 

together, push the drive control forward to propel mower. 

See Figure 4-5. The farther the control is pushed forward, 

the faster the mower will propel.

Figure 4-5

4. 

Once pressure is released from the control it will return to 

the neutral position and the drive will be disengaged.

NOTE: 

For ease of use, while gripping the controls, simply lock 

your wrist and elbows and walk - the unit will automatically 

adjust to your speed.

WARNING: 

The operation of any lawn mower can 

result in foreign objects being thrown into the eyes, 

which can damage your eyes severely. Always wear 

safety glasses while operating the mower, or while 

performing any adjustments or repairs on it.
The following information will be helpful when 

operating your mower.

WARNING! 

Plan your mowing pattern to avoid 

discharge of materials toward roads, sidewalks, 

bystanders and the like. Also, avoid discharging 

material against a wall or obstruction which may 

cause discharged material to ricochet back toward 

the operator.

Do not mow at fast ground speeds, especially if mulching or a 

grass collector is installed.
• 

Do not cut the grass too short. Short grass is prone to weed 

growth and yellows quickly in dry weather.

Содержание 12ABW32G897





























Отзывы: