24
Precautions for use and maintenance
In some areas of the machine there are some residual risks that could not be eliminated during the
design phase or protected by guards due to the particular operation of the compressors model
MCH
13-16-26-32/ET Compact
(Fig. 24-25). Each operator must be aware of the residual risks present
on the machine in order to avoid possible accidents.
4 . 1 . 2
4 . 1 . 2
4 . 1 . 2
4 . 1 . 2
4 . 1 . 2
Residual risk areas
Residual risk areas
Residual risk areas
Residual risk areas
Residual risk areas
24
25
Table 2
MCH
13-16-26-32/ET Compact
POSITION
DESCRIPTION
1
Danger of polluting the air produced owing to the possibility of mixing fumes or vapours from the lubricating oil with
the compressed air produced.
2
Electrical danger. Use the machine with suitable protection from the electrical power supply especially in the presence
of water and humidity.
3
Danger deriving from the noise emitted by the compressor if maintenance work is carried out without the safety
guards.
4
Pump unit area : danger from heat. For any maintenance operation (requiring the removal of the safety guard) wait
about 30 minutes after turning off the engine.
5
Transmission belt area: danger of crushing or dragging by the belts when maintenance work is carried out without
the safety guards.
6
Cooling fan area: danger of impact and abrasion if the cylinders are refilled without the safety guards.
Содержание MCH 13/ET
Страница 68: ...68...