15
14
13
Technical description
ACTIVE CARBON AND MOLECULAR SIEVE FILTER (Fig. 14)
For model MCH 13-16/ET, the filter is housed inside
the compressor covering panel, while for model
MCH 26-32/ET there are two active carbon filters
both of which are located on the outside of the
compressor on the front panel.
The filter consists of an aluminium tube (B) that
holds the filter cartridge (A).
The shell of the cartridge contains the active carbon
(C) and the molecular sieve (D) placed between
felt disks.
The condition of the cartridge is of fundamental
importance for the quality of the air (see paragraph
11.7 for replacement instructions).
2.2.7
2.2.7
2.2.7
2.2.7
2.2.7
Filters
Filters
Filters
Filters
Filters
INTAKE FILTER (Fig. 13)
The suction filter is coupled directly to the lid of
the 1
st
stage head.
The intake filter consists of a cylindrical aluminium
casing provided with a screw cap that holds the
filtering cartridge.
A special attachment is provided on the filter for
the connection of an extension (optional) which
enables air to be taken from the outside when the
compressor is installed in a place without ideal
ventilation.
For the compressor to operate properly, the filter
maintenance must be carried out as provided for
and at the intervals recommended (instructions in
paragraph 11.6).
Содержание MCH 13/ET
Страница 68: ...68...
