26
5.
Close the drawer.
Push the drawer closed and turn the latch.
6.
Select the cycle.
From the LCD, select the cycle you want to run
(to learn more about the available cycles,
see
Section 6. Sterilisation Cycles).
Press the icon with the cycle time you want to
see the cycle name and parameters.
7.
Press the
START
button.
If the chamber is cold, warming up can take
up to 5 minutes.
Allow the cycle to run to completion.
8.
Cycle is complete.
When the cycle is complete, press the
STOP
icon to unlock the drawer.
9.
Remove the load.
Open the drawer. Wearing heat resistant
gloves, grasp the trays on either side and lift
the load from the drawer.
If User PIN ID has been enabled, you will
be prompted to enter your User ID and PIN
before your cycle selection is accepted.
If there is a problem with the drawer lock or
water, a PRECYCLE SCREEN will appear.
CAUTION!
The metal parts will be hot.
