Coltene SciCan BRAVO G4, Техническое и сервисное руководство, Страница: 50 / 116

Sterilizers Bravo G4
- TECHNICAL MANUAL
48
SERVICE MENU EN
SQ29 – ENTER REF
The ENTER REF function lets you enter the product code specific to each
individual model.
This code is stored at the factory and needs only to be re-entered after
the PCB has been replaced , according to the following procedure.
-
With device ON, home screen, plug a USB key pre-loaded with FW,
original version or later one. Make sure of the correct USB detection,
confirmed by 2 beeps.
-
Confirm NO to Update FW request and Cloud update request. Display
back to ENTER REF.
-
From ENTER REF screen, select the correct product code, among the
proposed one's, by means of the scrolling control buttons, screen side.
The product code is reported on ID label, on the rear panel confirm the
product code, remove the USB key when required. The device restarts
automatically.
SQ30 – ENTER SN
Function ENTER SN lets you store the unique serial number of each
individual autoclave.
The serial number is stored at the factory using the three counters
displayed.
The first three digits, unique to each model, are automatically assigned
when product code is entered (see REF INPUT).
SQ31 – REPORT MANAGEMENT
This function allows:
-
Downloading alarms history : .csv file (compatible with Excel)
containing information about the alarms generated by the autoclave.
-
Downloading cycles history
: .csv file (compatible with Excel)
containing information about all cycles performed by the autoclave.