Coltene SciCan BRAVO G4, Техническое и сервисное руководство, Страница: 49 / 116

Sterilizers Bravo G4
- TECHNICAL MANUAL
EN SERVICE MENU
47
SQ25 – CONTINUOUS CYCLE (ROW versions only)
Select CONTINUOUS CYCLE to display the STERILIZATION cycle
selection screen.
Select and activate one of the cycles to run it and repeat it automatically
with a 5 minutes pause between subsequent cycles.
The same procedure can be applied to the TEST cycles
SQ25.1 – CONTINUOS CYCLE (US/CA versions only)
Select CONTINUOUS CYCLE to display the STERILIZATION cycle
selection screen.
Select and activate one of the cycles to run it and repeat it automatically
with a 5 minutes pause between subsequent cycles.
The same procedure can be applied to the TEST cycles
SQ26 – EMPTYING CYCLE
Select EMPTYING CYCLE to eliminate any residual water from the circuit.
SQ27 - INITIAL SETTINGS
CAUTION
Confirming the reset will delete any custom settings for use
and all data and cycles.
The set language will not be changed.
SQ28 – USER MANAGEMENT
Select USER MANAGEMENT to display the user list management screen,
normally used by the dental surgery’s personnel.
The login password is not requested to users, including the administrator,
when operating from the SERVICE/USER MANAGEMENT menu.
It is possible to apply modifications, delete users, add users, change
authorisations.
CAUTION
The changes made, if confirmed, cancel the previous
configuration.