Colortronic CTT 1200 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 96

background image

Assembly

Compare the connected loads with those of the mains supply. Danger of injury through electrical
shock!

When using lifting gear, please observe the pertaining regulations. Caution: Danger of accidents!

Do not modify, add other equipment or change the design of the equipment without the approval
of the manufacturer. Caution: Danger of accidents!

Attachments not supplied by Colortronic must be manufactured in accordance with safety regula-
tion EN 294. Danger of accidents!

The equipment may only be operated when all the associated components are properly connec-
ted up and in accordance with the relevant regulations. This avoids injury and damage to equip-
ment!

Operate the device only if all its components are grounded. Danger: accident through electrical
shock!

Please note for installation that the equipment is top-heavy. Danger exists that it may topple over!

Take care that the device is not standing on the mains cable. This will prevent danger to people
and material!

Operation

Appoint an equipment foreman to be responsible for the equipment.

Ensure that the operating personnel are provided detailed instruction in the operation of the
equipment. Improper operation results in danger of accidents!

When the main switch is switched off for reasons pertaining to safety, it must be secured against
unauthorized activation. Caution: Danger of accidents!

Repair work may be carried out by trained personnel only. Caution: Danger of accidents!

Never operate the equipment when partially dismantled! Danger! Limbs may be caught in machi-
nery! Electric shock!

In case of malfunction, shut down the equipment immediately. Have malfunctions corrected im-
mediately. Danger of accidents!

The machine is intended only for the drying of granulated plastics. Any other or additional use is
contrary to specifications.

This equipment is not suitable for food processing.

The safety instructions of the connected machines must be followed.

Please note that sound levels exceeding 85 db(A) may in the long term damage your health. Use
the appropriate ear muffs. This avoids impairment of hearing!

Please note that the drying cells, drying hoppers and air pipings grow hot during use. Avoid tou-
ching any of these parts! Danger: Injury through burns!

Never operate the dryer without side panels. Danger: Limbs may be caught in machinery! Injury
through burns!

64.10-0127GB02

04/02

Dehumidified Air Dryer

Safety instructions 2-3

«
...
11
12
13
14
15
...
»

Содержание CTT 1200

































































































Отзывы:

Нет отзывов

Похожие инструкции для CTT 1200

Бренд: NANO Страницы: 26

Бренд: Olimpia splendid Страницы: 52

Бренд: Danby Страницы: 28

Бренд: DriSteem Страницы: 80

Бренд: Klimatronic Страницы: 71

Бренд: Condair Страницы: 72

Бренд: SMC Networks Страницы: 52

Бренд: DriSteem Страницы: 28

Бренд: DriSteem Страницы: 32

Бренд: Dri-Eaz Страницы: 12

Бренд: Dri-Eaz Страницы: 12

Бренд: Dri-Eaz Страницы: 15

Бренд: Kaz Страницы: 4

Бренд: Kaz Страницы: 20

Бренд: S&P Страницы: 20

humiSteam Basic

Бренд: Carel Страницы: 84

Бренд: Stadler Form Страницы: 56

Бренд: AHT Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды