Colortronic CTT 1200, Руководство по эксплуатации

Страница: 69 / 96

7.2. Assembly
»
Please ensure adequate carrying capacity of the lifting equipment.
Check the carrying capacity of the point of installation, particularly if installed
on a platform.
The place selected for installation should be as free of vibrations as possible.
The main switch must be freely accessible.
Ground the equipment against electrostatic charging.
A special foundation is not required for installation.
The dryer must be installed on a level surface, and may not be exposed to excessive humidity.
Maximum permissible ambient temperature of the control system is 45 °C.
To facilitate servicing, install the dryer such that it is accessible from 3 sides. Make sure that the
air filters can be changed without problems. The rear of the dryer can be placed against a wall.
To conserve energy, keep the distances between dryer, hopper and processing machine as short
as possible.
The location of the control unit should be chosen so that a clear view of the separators is guaran-
teed from the control unit. Thus any malfunctions which arise can be corrected more easily.
Fasten the transport cables to the eyelets of the control cabinets. During transport do not contact
or push against other components with the control panels.
7.3. Storage
The control system may only be stored at temperatures from -25 to +55°C (-13 to +131 °F).
Between delivery and machine commissioning the equipment should be stored in a dry, dust-free
and vibration-free room.
64.10-8248GB01
04/02
Dehumidified Air Dryer
Transport, Assembly and Storage 7-4