Colortrac SmartLF Ci 40, Руководство по обслуживанию

Страница: 94 / 101

Page 94
Ci Scanner Service Manual
16.3. NETWORK CONSIDERATIONS
Confirming network
connectivity using ping
and netstat
Two commands entered at the Command Prompt can be used to check
the status of connectivity between the PC and the Ci scanner. These are
the ping and the netstat -a commands.
To confirm that the PC is connected to the scanner use the ping
command:
ping <scanner IP address> -t
To confirm that the PC has ESTABLISHED a connection with the
scanner's command and data ports use the netstat command:
netstat -a
17. DIAGNOSTICS
17.1.
INTRODUCTION
The diagnostic flow diagrams detailed below are designed to help technicians identify faults and other
technical problems. They are a guide, they should not be considered exhaustive. Technicians should
expect to adapt these diagnostics to their specific circumstances.
17.2. UPDATES
Diagnostics are updated regularly. For updates and further diagnostics please refer to the Colortrac
Help Desk and Technical Support Web Site.