Page | 44
Verve Hybrid
Ink Supply System Maintenance
Follow the below instruction for maintaining the ink supply system
•
Appearance Inspection
o
Check is there any leak between joint and ink tank, joint and valve seating.
o
Check is there any broken-on ink tubes.
•
Filter Replacement
o
Check the disk filters which should be changed after 3 months or 800 hours working.
•
Ink Tank and Pump Cleaning
o
Check for ink impurities in the ink pumps and clean the pump with flush water to avoid ink
clogging
Computer Maintenance
Follow the instructions for computer maintenance:
•
Select the advance configuration computer to perform printing operations.
•
High-speed interface card should be used.
•
Install the necessary control procedures, processing software, and antivirus software in the
computer for speed operations.
•
Should use the advance backup control software and relative procedures for security purpose.
•
Do not use computer to surfer the internet.
•
Do not insert or pull out USB cable when machine or computer is ON.
Using and Maintenance of Print Head
Print head is a key component of the printer, must use and maintain it correctly, so that can guarantee good
printing effect and print head life. Pay attention to potential problems caused by environment, heat and
moisture, collision, cleaning etc.
Follow the instructions given below for long life of the machine:
•
Print head should work with environment temperature 18~28, humidity 35%~80%, dust-free and
exhaust condition.
•
Keep the carriage exhausted to ensure the print head with optimum heat abstraction.
•
Print head nozzle is made of thin film, thus be careful while storing, loading, unloading, cleaning, and
soaking, to prevent it from collisions or short circuit.
•
Prevent print head from severe shock, otherwise it will damage the piezoelectric ceramic oscillation
in the head.
•
Print head must be cleaned by flush water to remove ink stains and stoppage.
•
Keep the print head in a liquid to avoid dry out situation.
•
Keep the print head away from light to avoid dry out situation.
•
Prevent the object or human body with static contact the print head.
•
Print head nozzles should be kept away from hands, ink, flush, etc.
•
Should be kept clean and prevent oxidation.
