Colorjet Verve Hybrid Скачать руководство пользователя страница 44

Страница: 44 / 52

Page | 43

Verve Hybrid

Control System Maintenance

Follow the below given instructions for control system maintenance:

•

Static Discharge

One must discharge electrostatic waste of the machine before touch the electronic
components and parts of it.

Do not touch the pin connectors and welded joints on circuit boards and integrated circuit
boards.

•

Control Wiring Maintenance

Check the control wiring of the machine whether loose or disconnected.

Check high-power output terminals whether loose or disconnected, such as the input and
output terminals of air switches, contactors, and relays.

Check the power system whether can provide the rated voltage to all parts of the machine
or not for smooth and stable operations.

Mechanical System Maintenance

Follow the below given instructions for maintenance of mechanical system of the machine:

•

Floor should be dust-free treatment before opening the machine.

•

Give lubrication oil to all the parts of the machine and the lubrication oil should with adhesion force
between 30cst to 150cst.

•

Carefully install the print heads. In case, print heads are not properly installed then it may cause of
head damage and bad printing results.

•

Check the tightness of carriage belt for quality printing.

•

Lubricate regularly to all parts of transmission bearings.

•

If the slider is not running smoothly, remove the same and clean it using the chemical provided with
the machine.

Encoder System Maintenance

Follow the below given instructions for maintenance of encoder scale:

•

Clean ink and dust from the Encoder ruler.

•

Check all the installation and connection screws carefully, if loose.

•

Clean the surface of Encoder Ruler and the direction Encoder for effective working.

•

Encoder sensors should kept carefully. In case, Encoder ruler gets broken due to any reason, then
sensor is inactive or not working.

•

Keep water, ink, and oil away from the Encoder ruler to avoid Encoder ruler error.

•

Encoder sensor shouldn’t work in corrosion environment,

thus environmental condition should be

according to the environment condition.

Содержание Verve Hybrid





















































Результаты поиска

Содержание Verve Hybrid

Отзывы:

Похожие инструкции для Verve Hybrid

Бренды по названию

Популярные бренды

Colorjet Verve Hybrid, Инструкция по установке и устранению неисправностей

Результаты поиска

Содержание Verve Hybrid

Отзывы:

Похожие инструкции для Verve Hybrid

Бренды по названию

Популярные бренды