Colorjet Verve Hybrid, Инструкция по установке и устранению неисправностей, Страница: 18 / 52

Page | 17
Verve Hybrid
•
Color Bar
o
Space : Specify the distance of the color bar from the image.
o
Width : Set width of the color bar.
o
Placement : Enable or disable the color bar and its placement viz. left, right, or both.
o
Height same with image : If enabled, the height of the color bar is same as the image
height.
•
Spray Setting
o
Auto Spray : Set the duration (number of passes) for auto spraying.
o
Spray Period : Define the duration for spraying (set as 180). If the duration increased, spray
frequency gets decreased.
o
Print Pre-spray Time : This option works when the Spray Before Print option is enabled and
used for defining the duration, if spray before issuing the Print command.
o
Idle Spray : Spray during carriage at home position. This option must be enabled.
o
Spray Before Print : This option works with the Print Pre-spray Time option. When enabled,
one can specify the duration, if spray before issuing the Print command.
The Move tab is shown in the image below:
Fig 19: Displaying the Move Tab
Using the Move tab, the Y Speed can be updated as per the requirements.