Page
16
of
47
NEPTUNE HQ
Additionally, perform the same action for all colors and release ink up to 5ml.
Step 9:
Simultaneous, release the purging button and cap the
Air Releasing Pipe
.
Step 10:
Insert one end of the head cable on the top of the Print Head by following image, as shown below:
Fig 19: Inserting the Head Cable on the Top of Print Head
Note:
While inserting the head cable, the machine must be Switch OFF.
Step 11:
Similarly, insert the second end of the head cable on the Head Board, as shown below:
Fig 20: Inserting Head Cable to the Head Board
To verify the head cable orientation, please carefully view the highlight area on the above image.
Step 12:
Check whether the
Waste Bottle
is attached or not.
Step 13:
Perform the
Head Purging
for all colors.
Step 14:
Perform the
Head Blotting
to gently clean the Print Head.
Step 15:
Perform the
Nozzle Test
to check the nozzle status of all the Print Heads.
Now, the Print Head gets installed.
