Page
10
of
47
NEPTUNE HQ
Step 5:
Tight all the Allen Bolts of M6 x 16 with M6 Washer to fix the Center Jack, as shown below:
Fig 7: Fixing Center Jack
Step 6:
Prepare the media rollers with shafts.
Step 7:
Unscrew the bearing holders from the cabinets and insert to the right cabinet.
Step 8:
Insert and fix the Spur Gears, as shown below:
Fig 8: Fixing the Spur Gears
Step 9:
Install the Media Motor again.
Step 10:
Carefully lift the upper body of the printer and place on the stand so that its screw holes align.
