Assembly instructions
To open the chassis
Pull the folding catch to the side and lift the handle upwards (1a)
until the handle locks in place . (1b).
To attach rear axle and wheels and functions
Push the axle onto the rear legs (2a) until the spring clips have
popped through the holes. Push the stems of the rear wheels in to
the axle until they click in place (2b). Pull the wheel gently to make
sure they are secure. To remove the rear wheels, push the silver
button in and pull the wheel outwards.
To operate the brakes
With your foot, push the foot pedal on the right side down until it
clicks in to place (3). Lift upwards to release the breaks.
WARNING! Ensure that all the locking devices are engaged before
use.
Front wheel assembly and functions
Push the front wheels on to the front legs of the chassis until they
click into place. Pull them gently to make sure they are secure. (4).
Push the swivel catch up to select fixed wheels or down for swivel
wheels.
To remove the front wheels you can either push the button in and
pull the wheel unit and stem off or you can just remove the wheel
unit by pushing the button located on the bottom of the leg and pull
the wheel unit off.
Parts List
A Chassis
B Rear Axle
C Front Wheels x 2
D Bumper Bar x 2
E Footmuffs x 2
F Rear wheels x 2
G Raincover (Not shown)
A
B
C
D
E
Fig. 1a
Fig. 2a
Fig. 2b
Fig. 3
Swivel
catch
Fig. 4
Folding catch
Fig. 1b
Accessories
A raincover is supplied with this stroller.
The raincover should be placed over the hood and secured
with the velcro tabs. It should be folded then placed in the
basket when not is use.
F
EN
5
