COLENTA PrintlineProcessor 56 RA, Инструкция по эксплуатации

Страница: 26 / 40

AN 06/2003
page 22
1.
Cover open Cloes the cover of the Processor (Cover switch)
Close the cover of the processor.
In case the processor is switched on with no chemistry in the tanks, you will get
the following messages:
2.
Tank1 LowLevel(DEV)
Tank2 LowLevel(BF)
Tank3 LowLevel(SS1)
Tank4 LowLevel(SS2)
Tank5 LowLevel(SS3)
Fill the tanks according page 17 to remove the above error codes.
3.
Rep1 low level (DEV)
Rep2 low level (BF)
Rep3 low level (SS)
Fill the replenishment containers.
4.
Tank1 too cold (DEV) programed 35°
Tank2 too cold (BF) programed 35°
The above listed error codes will inform about the actual temp. after the processor
was filled with chemistry. Now the processor will begin to heat up all soulutions
until the preprogramed values are reached.
11.2 POSSIBLE ERROR CODES AFTER SWITCHING ON
Level switch for tanks
SS
Levelsensor
(Lowlevel)
DEV
BF