background image

 

GreatNeck

R

 

Saw Manufacturers, Inc 

   

1 year Limited Warranty

 

This warranty covers any defects in materials or workmanship of the enclosed 

product.

 

GreatNeck Inc. will repair or replace any defective materials due to 

craftsmanship of the product. This warranty does not cover any problem caused by 

misuse, abuse, accidents or acts of God, such as floods or hurricanes. Consequential 

and incidental damages are not covered under this warranty. Coverage terminates if 

you sell or otherwise transfer the ownership. If you feel you have a defective product, 

please submit a copy of your receipt to the address below and call 1-855-900-2653 

for instructions prior returning this item to the store or sending back to: 

GreatNeck Saw Manufacturers, Inc 

165 East 2nd Street, Mineola,   

NY 11501 

We will inspect the product and contact you within 72 hours to give you the results of 

our inspection.    We reserve the right to repair or replace the product at our discretion. 

However, we may replace the product with one of similar but not exact features. 

Parts and Service Information available call GreatNeck at 1-855-900-2653

 

This warranty gives you specific legal rights, and you may have other rights 

which vary from state to state.

 

 

- 11- 

Содержание CM01213-15












Отзывы: