Cole Parmer POLYSTAT, Инструкция по установке и эксплуатации

Страница: 22 / 49

4-2 Cole Palmer
Section 4 Operation
Refrigerated units should be left in an upright position at room
temperature (~25°C) for 24 hours before starting. This will en-
sure the lubrication oil has drained back into the compressor.

Before starting the unit, double check all USB (optional), elec-
trical and plumbing connections.

Do not run the unit until fluid is added to the unit. Have extra fluid
on hand. If the unit will not start refer to Section 5 Troubleshooting.
• Place the circuit protector located on the front of the
unit to the
I
position.
• Press , the Start Display will appear.
• Ensure the start symbol has a highlight box around it, if not
use the arrow keys to navigate to the symbol.
Setup
Start Up
• Press . The unit will start and the start symbol will turn
into a stop symbol (
NOTE
It will take 30 seconds for the compressor to start.

NOTE After start, check external plumbing connections for leaks.

The SP1 and Menu portions on the top of the display are used to
view and/or change the controller's settings. They are explained in
detail later in this Section.
CAUTION
CAUTION
I
O
Stop Symbol
20.0°C
Highlighted
Start Symbol
Reservoir
Fluid
Temperature
20.0°C
24.2°C
SP1 Menu
Start Display