2
Cole-Parmer will exchange, replace or repair the existing balance for any damage that appears to be
faulty by production or by construction within the 5-year warranty period.
Warranty is voided if:
A. Cole Parmer will exchange, replace or repair the existing balance for any damage that
appears to be faulty by production or by construction within the 5-year warranty period.
B. Warranty is voided if:
•
mechanical defects caused by inappropriate use:
•
defects of thermal and chemical origin,
•
defects caused by lightning, overvoltage in the power network
•
defects caused by water damage
•
or other random event
•
overloading the mechanical measuring system
•
installing another version of the operating system
•
utilizing the balance contrary to its intended use
•
repairs carried out by non-authorized service centers
•
removing or destroying protective stickers which secure the balance’s housing against
unauthorized access
C. Warranty card must be filled out for warranty to be valid.
UNPACKING AND INSTALLATION
PLACE OF USE AND ASSEMBLING
•
The balance should be stored and used in locations free of vibrations and shakes, free
of air movement and dust.
•
Ambient air temperature should not exceed the range of: +15 °C to +30 °C.
•
Ambient relative humidity should not exceed 80%.
•
During balance operation, ambient temperature in the weighing room should not change
rapidly.
•
The balance should be located on a stable wall console desk or a stable working table
which is not affected by vibrations and distant from heat sources.
•
Keep all package element should your device be transported in the future. Remember
that only original packaging can be used for shipping purposes. Prior to packing,
uncouple any cables, remove any separable components (weighing pan, shields,
inserts). Pack the device components into an original packaging. The original packaging
protects the equipment against potential damage during transportation.
STANDARD DELIVERY COMPONENTS LIST
•
Balance and components shown in Section 2.4 depending on balance model
•
Warranty Card
•
USB
o
User Manual
o
Balance USB Driver
o
RLAB Software
o
USB COM Driver
UNPACKING
To unpack the system, follow the diagram below-