8
EN
GL
IS
H
1
5
2
6
3
4
5.2 Wet vacuuming
Warning:
Do not use the wet and dry vacuum cleaner to vacuum toxic, hazardous or
flammable substances/liquids.
Note: Do NOT use the cartridge filter or dust bag when wet vacuuming.
1.
Warning!
Always make sure the plug is disconnected before servicing or adjusting.
2. Attach the foam filter (J) before wet vacuuming. Slide the foam filter carefully onto
the filter basket making sure it covers the entire filter basket.
3. Attach the required accessories to the hose.
4. Plug the mains lead into a wall socket.
5. Switch the vacuum on using the power switch.
6. Remember to empty the container once it is full.
Things to consider when wet vacuuming!
• Only use the foam filter when wet vacuuming.
• Make sure that the foam filter is clean and dry and secure it onto the filter basket
before starting to wet vacuum.
• The safety cut-out float switch stops the suction when the water level in
the container reaches a certain level, thus preventing water from entering
the motor. The motor will race when the suction function has been stopped by
the float. Switch the motor off and empty the container.
• Empty the container before it becomes totally full and clean it after use.
• Clean the foam filter as and when required. Remove the filter and wash it by hand
in water with a mild detergent, let it air-dry.
• Do not submerge the entire nozzle under the surface. Leave some space so that
air can also pass through when vacuuming a large amount of liquid.
•
Remember to reattach the filter before using the vacuum again. NEVER use
the wet and dry vacuum without a filter.
