6
EN
GL
IS
H
9
13
10
14
11
15
12
16
9. Fasten the filter cover by turning the locking knob on the filter cover to the locked
position.
10. Slide on the pre-filter (the filter bag) (M) outside the cartridge filter and pull the string.
11. Use the dust bag (I) when necessary to achieve the best possible filtering results.
Press it securely onto the inlet inside the container.
12. Replace the motor unit/top on the container.
13. Secure the top section onto the container with the over-centre catch.
14. Secure the accessories.
15. Attach the suction hose to the container’s hose connection (10). Press in and turn
it clockwise until it is securely fastened.
16. Attach the required accessories to the hose.
5. Use
•
Warning!
Read the warning text before use.
•
Warning!
Always make sure the plug is disconnected before servicing or adjusting.
•
Note:
The cartridge filter (G) is for vacuuming dry dust. The foam filter (J) must only
be used for vacuuming water.
• When vacuuming very fine-particled substances, both the dust filter and pre-filter
must be used in addition to any dust bag.
• The warranty will be void if the wrong type of dust bag has been used.
