11
EN
GL
IS
H
1
2
3
4
5
1
5b
2
6
3
7
8
4
5a
1.
Warning!
Always make sure the plug is disconnected before servicing or adjusting.
Remove the motor unit/top and place it upside down. Remove the cartridge filter
(G) from the filter basket, being careful not to damage the filter.
2. Carefully slide the foam filter (J) onto the filter basket.
3. Make sure that the filter covers the entire filter basket.
Cleaning the foam filter
4. Carefully remove the foam filter.
5. Wash the filter by hand using a mild detergent and the rinse with clean water.
Let it air-dry and replace the filter.
8.3 Cleaning the HEPA filter
1. Make sure that the plug is disconnected.
2. Push up the catch in the grille cover against the hanging hook (5).
3. Remove the cover over the HEPA filter.
4. Remove the filter.
5. Clean the HEPA filter following option A or B. Change the HEPA filter if it is not
possible to clean it.
-
A. Carefully blow the HEPA filter clean using compressed air from the outside
in. Or use a soft brush to help.
-
B. Wash the filter by hand using a mild detergent and then rinse using clean
water. Let it air-dry and replace the filter.
6. Replace the HEPA filter and cover.
7. Secure the top of the cover first.
8. Secure the cover and fasten using the catch.
8.2 Fitting and cleaning the foam filter
Assembly