10
EN
GL
IS
H
1
2
3
4
6
7
8
5
8.1 Fitting and cleaning the cartridge filter
Assembly
1.
Warning!
Always make sure the plug is disconnected before servicing or adjusting.
Remove the motor unit/top and place it upside down.
2. Attach the cartridge filter to the filter basket*, being careful not to damage the filter.
3. Make sure that the filter covers the entire filter basket.
4. Fasten the filter cover (H) by turning the locking knob on the filter cover to
the locked position.
5. Slide on the pre-filter (M) and pull the friction lock.
6. Fit the dust bag (I) for extra efficient filtering. Replace the motor unit/top (8) onto
the container (11) and fasten it with the over-centre catch (2).
*Note!
The cartridge filter fits best if the side with a high edge on the inside is placed
against the motor unit/top.
Cleaning the cartridge filter
7. Carefully remove the cartridge filter (G).
8. Brush or shake the filter free from debris (remember to do this outdoors).
Wash the filter by hand using a mild detergent and then rinse with clean water.
Let it air-dry for about 24 hours. Replace the filter only when it is completely dry.