Coinco 9300-S Series, Руководство по эксплуатации и обслуживанию

Страница: 3 / 28

Page 3
INTRODUCTION
This manual contains information on installing,
operating and maintaining Coinco’s 9300-S series
coin changers which included:
9341-S ................. 117VAC
9342-SC .............. 24VAC
9360-S ................. 117VAC
Familiarize yourself with this manual to obtain the
best performance from your coin changer.
Refer to the model and serial number when calling
for information. Both serial and model numbers can
be found on the label on the side of the changer.
Example: Serial number 1200008242 (week 12, year
2000). The first and second digits indicate the week
of manufacture and the third and fourth digits
indicate the year of manufacture.
AFTER UNPACKING
After unpacking the unit, inspect it for any possible
shipping damage. If the unit is damaged, notify the
shipping company immediately. Only the consignee
(the person or company receiving the unit) can file a
claim against the carrier for shipping damage. We
recommend that you retain the original carton and
packing materials to reuse if you need to transport or
ship your changer in the future.
If the coin changer is being stored or used as a
spare, always keep it in its shipping carton when not
in use. This will keep it clean and offer the best
protection for the unit.
MODEL EXPLANATIONS
The 9341-S, 9342-SC, and 9360-S changers have a
vend price setting up to $12.75 in five-cent
increments and are equipped with electronic coin
acceptance. They pay out nickels, dimes and
quarters from self-loading coin tubes and accept
nickels, dimes, quarters and dollar coins.
The 9341-S directly interfaces with the standard 6-
pin bill validator interface cable and non-standard bill
acceptors (12-pin connector).
The 9360-S directlly interfaces with both standard
and non-standard bill validators,
Cash Accountability
TM
, credit display and M.I.S.
TM
The 9342-SC inferfaces with the standard 6-pin bill
validator interface cable and 3-pin cash
accountability meter.
FEATURES
· Accepts U.S. nickels, dimes, quarters and dollar
coins.
· Pays out nickels, dimes and quarters from self-
loading, high capacity change tubes in least
number of available coins.
· Select high or low quarter tube level by simply
flipping a switch.
· Any vend price from $.05 to $12.75 in $.05
increments can be selected using a single switch
module.
· Dollar coins can be rejected or accepted by
flipping a switch.
· Heavy-duty D.C. payout solenoids provide fast,
accurate payout.
· Change capacity of $40.55
· Escrow until vend or escrow until select can be
selected by simply flipping a switch.
· Provides the fastest and most accurate coin
acceptance of any electronic unit available
today.
· Directly interfaces with standard bill validator.
No additional wiring is required.
· Interfaces with non-standard bill validator with
the addition of a 406890 adaptor harness.
(9360-S and 9341-S)
· Directly interfaces with cash accountability
meter (through a 3-pin connector). Meter part
number 406735. (9360-S and 9342-SC)
· Directly interfaces with credit display, part
number 406872. (9360-S only)
· Pays out to the last coin in the changer tube to
provide the maximum usage of a bill validator.
Section 1: General Information