Coinco 9300-S Series, Руководство по эксплуатации и обслуживанию

Страница: 17 / 28

Page 17
Section 5: Troubleshooting
TROUBLE POSSIBLE CAUSE PROCEDURE REMEDY
Exact change light does Open circuit Check continuity between pin 5 of Replace main logic board
not flash for an over changer 8 pin Jones plug & P3
insertion when correct pin 1, if open
change is not available
If harness is not open Replace logic board
Vends at wrong price Logic board or acceptor Set vend price for $.50. Deposit Check solenoids for proper
$.25. Depress coin return. Deposit connection.
$.05. Depress coin return. Deposit
$.10. Depress coin return. If
amount returned doesn’t equal
amount deposited
If problem still exists
Replace logic board
If the problem still exists Replace acceptor
Coin always goes to Tube sensor board or acceptor Check sensor boards for broken or Replace tube sensor board
cash box loose components and check cable
from sensor board for damage or
improper connection
If coin still goes to cash box
Replace acceptor
If coin still goes to cash box Replace main logic board
Coin always goes to Coin tube gate in open Remove acceptor back cover, Repleace acceptor
coin tubes position check solenoid for free operation
Defective tube sensor board Inspect tube sensor board for Replace tube sensor board
loose or broken components,
frayed cable, etc.
If coin still goes to change tubes,
Replace main logic board
Does not accept Dollar accept switch OFF Turn dollar switch ON
dollar coin
If still doesn’t accept dollar coin Replace acceptor
If still doesn’t accept dollar coin Replace main logic board
Does not escrow Check for position of Set escrow option. If set properly Replace main logic board
properly in ESC/SEL escrow option
mode If still no escrow Replace acceptor
Fills $.25 tube when Check low $.25 If quarter still goes to quarter tube Replace tube sensor board
low $.25 tube level option switch in
is selected ON position If quarter still goes to quarter tube Replace main logic board
If quarter still goes to quarter tube Replace acceptor
9302-GX TROUBLESHOOTING GUIDE